Making Money with Gold Jewelry Wholesale

This information will be useful if you are considering purchasing gold jewelry wholesale and want to learn how to profit from it. There are many factors to consider when selling jewelry, and there are a few things to consider if you want to sell gold jewelry successfully. Whether you aspire to be wealthy and live the life you desire, or simply want to sell enough jewelry to make your business successful, here are some helpful hints.

Where To Find Wholesale Gold Jewelry?

There are a variety of places where you can buy gold jewelry wholesale and resell it. However, if you want to save a lot of time and effort, you should go online to a website that is dedicated to selling wholesale jewelry to those who want to be resellers. Such as Play With Diamonds – Wholesale Gold Jewelry Supplier. After you’ve found the website you’ll be using, you’ll want to do some research. You want to figure out what kinds of jewelry people are buying, so you can buy those instead of pieces you’re not sure will sell.

You will have an easier time selling your jewelry if you do some research and buy the necklaces, earrings, watches, and other types of jewelry that people are buying. You will find wholesale jewelry sites that charge a membership fee and places that do not charge a membership fee when buying gold jewelry wholesale. If you find a place that requires you to pay a membership fee, make sure you understand what is included in the fee, and if you find a place that does not require you to pay a fee, make sure you understand what the requirements are for the quantity of jewelry that you must buy.

You can make a lot of money by purchasing gold jewelry in bulk and reselling it to your customers. You will be very successful selling jewelry if you ensure that you understand the types of jewelry that your customers are looking for and that you locate it in the appropriate location. If you follow these guidelines, you will be able to buy and sell jewelry properly.

Who Can Apply and Be Granted a Patent?

Obviously the original inventor is entitled to apply and be granted a patent over their new invention. However it is often the case that many people are involved in the creation of an invention and therefore it can become quite difficult to ascertain who exactly the patent should be registered against.

Patent applications can be made by an individual inventor or company. In many cases the application can be made by two parties jointly and when the patent is granted the rights are allocated accordingly.

Be aware that if you created you invention whilst employed i.e. either in the course of your duties or during work hours and used work resources, then it could be the case that your employer is legal owner of your invention. Check your employment contract for any relevant provisions. If you are still unclear you should seek advice from professionals, such as InventHelp patent an idea agency.

The Length of a Patent

A patent can be granted for 5 to 20 years. A block application can be made for 0-4 years, anything above this, you must renew the patent every 4th anniversary.

The Benefits of Having a Patent

Prevention against exploitation – having patented protection over your invention means that others are prevented from copying, using or selling your idea without your permission. This keeps the value and originality of your work safe and it is all easily done with InventHelp patent services.

Generating an income – owning a patented product or process can provide a source of income (depending on demand). The patent can be licensed and , or sold the same as other assets. For example if you have designed a revolutionary car engine and patented the ‘revolutionary’ aspect of the invention. If Honda then wished to use the invention in one of its cars, you could license the right to use the patented object to the company in return for capital. You can of course sell your patented rights to another party.

New, Improved or Patented?

The first step is to determine if your invention or idea is entirely new, an improvement on an existing product, or a product that is already patented and needs to be marketed and licensed. For that reason it is best to hire a professional patenting agency, such as patent invention InventHelp agency.

An Entirely New Concept

A new product is something that did not exist before. It is not an improvement or change to a current product, but rather an entirely new object used to achieve a goal for which nothing is currently available. Very few inventions are “new” in this sense. Most, in fact, are “improvements” of existing ideas.

Whether it is a completely new concept, or an improvement on an existing concept, most new inventors don’t give themselves enough credit – they think that their idea is not quite good enough, or they feel that they can not proceed with their concept because they have not built a model or prototype.

Don’t sell yourself short. Only the market can determine whether your product has value. Some of the most bizarre concepts have gone on to make millions (like the “Pet Rock”).

An Improvement of an Exiting Product

Almost every invention presented to us is an improvement of an existing idea, which can be defined as any additional feature, style, color, or shape that is not available in an existing product design. The improvement may help consumers when using the product or it may allow them to use the product in additional ways. An improvement to an existing product can be as important, if not more important, than the invention of the original product.

Already Have a Patent

Many people operate under the misconception that if they already have a patent on their concept, manufacturers will find them. This is just not the case. Without putting your invention “out there” through the proper channels and in the proper ways, a patent will wind up being nothing more than an expensive decoration to hang on your wall.

If you are one of the many individuals who have invested tens of thousands of dollars in a patent without having the proper marketing campaign to accompany it, contact us immediately. Let InventHelp patent invention agency assist you through the second and equally important half of your journey.

When Should You Order a Novelty Search?

A novelty search, or patentability search, is a search to determine if an invention is new. Since a patent will only be issued for inventions that are “new, useful, and non-obvious,” novelty searches are generally performed prior to preparing a patent application. However, some practitioners feel novelty searches are unneeded because patent examiners perform novelty searches as part of the patent examination process. So when should a novelty search be ordered? You should order a novelty search when the invention, or the quality of the issued patent, is important.

A novelty search improves patent quality in the following ways:

Better Claims – A novelty search uncovers what is already known about your technology, which allows you, or your attorney, to write the broadest claims possible. Or you could get it done by professionals – patent service InventHelp.

Preserving the Doctrine of Equivalents – Crafting the claims well, and avoiding amendments when the application in pending before the patent office, will help preserve the doctrine of equivalents for later use. The doctrine of equivalents lets you prevent your competitors from using inventions that are substantially similar to yours; broadening your claims to cover patents claiming similar features, as long as the features function in the same way, to produce the same result.

Satisfying the Duty of Disclosure – According to the patent office:

Your failure to adhere to the duty of disclosure can cause your patent to be invalidated. A novelty search, and subsequent submission of the references to the patent office, help ensure that you have satisfied your duty of disclosure.

Patents are presumed valid in light of information considered during the patent application process. Therefore, the references uncovered in your novelty search, submitted to the patent office, and considered by the examiner, will be extremely difficult for your opponents to use against you. Your patent will also better withstand any examination by potential partners or licensees.

From a business perspective, a novelty search provides the following benefits:

Confirmation of Novelty – A novelty search will help you determine what is novel about your invention, how your invention differs from existing inventions. The point(s) of novelty identified can be the basis of the unique selling proposition when you market the invention.

Confirmation of Value – A novelty search will give you information about the value of your invention. How crowded is the technology? The more work in an area the more valuable it’s likely to be. How large are the families of the patent references identified? The larger a patent family, the more money spent obtaining protection for the invention, and the more valuable the owners consider the patent.

Competitive Intelligence – A novelty search will let you determine who is competing in the area. The number of competitor patents, and their timing, will tell you the size of competing efforts – and whether they’re growing or shrinking.

Resource Efficiency – A novelty search lets you use your resources efficiently. A search will help you avoid wasting resources on weak inventions and it will save you time and expense during the patent application process.

For more information, or to request a quotation, please contact Invent Help.

A Business Without a Sign is a Sign of No Business

That monument, ground or pylon sign standing outside your building should be a reflection of your image and brand. I once read, “A business without a sign is a sign of no business”. True enough. Not many businesses can survive without a sign to direct traffic to their doors unless they are a web-based company that relies on other methods. Not so the larger retail companies we recognize regularly. Shell, Esso, McDonalds as well as The Bay, Sears, Canadian Tire and other bastions of retail excellence. Their pylon signs are not the only things that bring customers to their doors but it is an important part of the corporate strategy. It reflects the brand and broadcasts for blocks, where you should turn in.

Not every company can afford a huge pylon sign like the major corporations. But it still must be a part of the corporate strategy. Many companies share space on a pylon sign with other tenants or condo owners. While your space may be limited, don’t give up on making the most of what is available to you. This means maximizing the available space. Let’s say you are negotiating a lease for a building in which you share space on a pylon sign. Try to negotiate with the landlord to increase the number of places or size of space available on the sign.

If part of the sign is vacant, you might be able to negotiate using that space until the vacant space is required. There are benefits to both parties here. You gain extra signage for the beginning of the lease (when it is most important for customers to find you) and the landlord’s property will appear fully occupied (which benefits all the tenants since prosperity begets prosperity).

I remember my days in the gas station business when, if a station had no customers, we advised the managers to park a car or two at the pumps. You’d be surprised how this technique brought customers onto the lot! An empty lot looks deserted and forbidding. But a lot with cars on it attracts other customers.

How much information should go on a pylon sign? As little as possible! Remember my mantra: “The best sign says the least.” Of course, custom signs are always preferred and will have the bigger impact. Certainly the name and logo of the company must be the largest and most prominent items displayed. After that, any further information will only detract from the main message. The pylon sign is there to broadcast who you are and where you are, not give out a lot of information about your company. There are other vehicles for that.

Let’s talk about the layout of the logo and company name on the pylon. Sometimes, the configuration of the sign does not allow you to lay out the name and/or logo in the normal fashion. Unless you are designing and building a pylon sign for your own purpose, be prepared to re-configure the layout to maximize the available space. For example, your logo may quite square but the available space is long and thin.

If you don’t allow the designer to change the layout of the logo/name, it will be very small and very hard to see from a distance. That’s a short-sighted policy. I’ve seen this happen in many instances where a corporation, with strict rules on how the name and logo can be displayed, moves into a rented property. The head office refuses to bend on the layout of the sign. The result is a smaller than expected presence on the sign and an ineffective sign.

In summary:

  • Be prepared to negotiate additional space for a short period of time
  • Be flexible on the layout so that you maximize the space available
  • Only put the essential information on the sign – name and logo

The Financial Case for Telecoms Expense Management

The functional groups that get involved in developing a business case for Telecom Expense Management often include: IT, Sourcing, Finance and Global Technology Infrastructure Management.
The business case typically includes a detailed review of technology, projected productivity gains and savings for each project.

The refunds and savings to be made from utilizing a Telecom Expense Management program can be used to create a Return on Investment (ROI) business case to cost justify the investment in a system.

Typical identifiable and substantiated savings categories include:

  • Refunds due for unpaid past credits and billing errors.
  • Creation of asset register and asset record cleansing; plus inventory reconciliation with billing.
  • Client identified reductions through inventory reports e.g. obsolete modems previously used on lines that have since been removed.
  • Optimization recommendations.
  • Sourcing savings from new contracts at lower rates.
  • Improved transparency and visibility of expenses.

A return on investment is computed from the following calculation.

ROI = (“Gain from Investment” – “Cost of Investment”) divided by “Cost of Investment”

The cost of “no action” or delayed action should be considered too. Each month, organisations may be forfeiting opportunities to optimize their technology expenses, to save money. Claims for refunds, owed for billing errors, may be subject to a limited claim time period. Without a Telecoms Expense Management system it can be difficult to provide the evidence and documentation needed to support claims. Organisations should therefore recognize that there are real costs if they fail to invest in TEM services.

Water Vending Machines

While coffee and soda vending machines are certainly popular, there is a limit to how much caffeine some people want to drink in a day. Also, most people are aware of the need to stay hydrated and consume enough water throughout the day.

Carrying water bottles is not always practical, especially in warmer weather when it does not stay cold. The availability of a cold bottle of water is convenient at any time, but it is a real luxury in hot weather. In the workplace and many other places, water vending machines eliminate the need for unsanitary water fountains or the need to continually fill water coolers, as well. But, the most important detail in vending business is to have high quality vending machines. Well, Royal Vending Machines Sydney are the best vending machines in Australia.

Some water machines dispense only single serve bottles of water. The water sources are from companies that provide spring water or purified tap water that has been bottled. Other water dispensers are set up to dispense water in bulk. Customers can put in their money and fill water jugs of up to five gallons each.

This type of unit is generally connected to a tap water source and the machine purifies the tap water. It is an invaluable system for places that suffer a natural disaster or other interruption of the regular water supply.

Residential Radon Mitigation

When homeowners find out that they have a problem with high levels of radon, their first instinct might be to panic. But after that initial shock has died down, those homeowners need to get serous about fixing what could be a very dangerous problem for themselves and their families. Residential radon mitigation is not always fast or easy, but it can be remarkably effective, even in parts of the country known for their extensive radon problems.

How Radon Enters a Home

Radon can enter your home in a number of different ways, and it is important for any residential radon mitigation program to have a thorough understanding of where that radon is coming from. For instance, radon is naturally present in the soil in many parts of the country. The pressure differences between the interior of your home and the surrounding earth can create a vacuum effect and cause radon gas to be literally sucked into your home through cracks in the foundation or tiny holes in the basement walls. Any residential radon mitigation will have to address the underlying problem by equalizing the pressure inside and outside of your home. Once the pressure is equalized, that radon gas will no longer be sucked into your home, and once the initial radon levels are reduced you should not have any further problems.

But the foundation and surrounding soil is not the only way radon gets into your home. Radon can also get into your house through the water supply. Many parts of the country have problems with radon in the groundwater, and if you have a well in one of those areas your home is automatically at risk. If your well is contaminated with radon, this colorless and odorless radioactive gas could be seeping into your home each time you take a shower, wash the dishes or turn on the tap.

Again, any residential radon mitigation program you choose will need to be able to deal with the underlying problem, this time one of well water contamination. A quality radon mitigation contractor will come to your home armed with sophisticated water testing equipment to determine if your well is contaminated. Once they know for sure that radon is entering your home through the well, they will be able to take steps to stop that contamination and mitigate the current problem.

Get a Qualified Radon Specialist

Radon is a serious threat, and any mitigation efforts have to be equally serious. If you suspect that you have a radon problem in your home, you need to have the house, the well and the surrounding soil tested as soon as possible. And if you know you have a problem, you need to hire a residential radon mitigation specialist, such as the Radonhjelpenost.no, who has the training, qualifications, expertise and experience to get rid of those high levels of radiation inside your home and make sure that they do not return to threaten your home and your family.

Getting started… DC welding machines

There are basically 2 types of welding machines. The DC welder and the AC welder. For the sake of what we will be concentrating on in this article, the DC welding machine is the most common of the 2 types. When TIG welding, straight polarity (DCEN) is used. When setting up the machine for TIG the electrode or torch should be connected to the negative terminal of the welder. This will result in a cooler weld temperature at the material to be welded.

Another option that is very helpful, although not necessary is a foot pedal remote amperage control. This foot pedal not only controls the amperage from zero to a preselected high amperage, but also activates the High Frequency arc start and gas flow. If you happen to have an older DC machine that was designed primarily for stick welding, you do not have the remote options, High Frequency start, or gas control.

However, if this is all you have, this machine will work fine. Years ago, we used old DC generator type machines to TIG weld without any problems. The disadvantage was having to manually turn on the gas flow from the torch by means of a gas control knob, and scratch starting the arc which meant a highly likelihood of tungsten contamination in critical X-ray quality welds. This may not pose a real problem for simple welding applications but if there is a concern, a scratch plate to start the arc can be used.

With the advent of new technologies, the inverter type welder is an excellent choice for welders, because of their light weight, (40lbs or less!) portability, and dual voltage (115v or 220v). They all feature remote control, HF (high frequency) arc start, and shielding gas control which includes post flow gas timer control. Since I’m not in the business of selling welding machines, I won’t go through the list of impressive features on this Miller unit.

This unit is one of the commonly seen “Made somewhere over there” units that claim 3 in 1 capabilities…TIG, Stick, and Plasma cutting. A friend of mine recently purchased this model and asked me to evaluate it’s performance. Well, I don’t know if I would carry this machine to a Union job site, but to my surprise it worked remarkably well for a under $500.00 machine! Plugged into a standard wall outlet, the TIG process, along with the remote function and post gas control did an impressive job. The plasma cutting was equally impressive, and at 35lbs, very portable…so for the cost, this may be the way to go for the budget minded…

Electric Roller Shutters

You’ll never have to contend with the wear and tear that occurs on straps, ropes and pulleys. Roller shutter technology makes it easy to operate and maintain heavy shutters without worrying about injury or damage to property, person or equipment.

Hurricane roller shutters come in all shapes, sizes and colors. Electric shutters offer quiet operation while providing complete protection against anything Mother Nature can trow at you. There are wall-mounted control panels as well as hand-held remote controls that can operate up to 5 individual window roller shutters. They are multi-functional, offering customers the option of controlling lights and heat/air conditioning as well. There are high end handheld devices that offer on-screen display for easy navigation and software that gives customers the option of activating their electric roller shutters from a remote location.

Commercial Roller Shutters

Businesses can rest assured that their bays are secured when electric roller shutters have been installed on the premises. A monitoring system can be set up by private contract so that you will know exactly who has been at your property at any given time. You will control total access of your premises.

Restaurants will no longer have to completely set up outdoor seating areas when roller shutters have been installed. Time and energy can now be directed towards other things like improving service or adding menu items that will bring in more customers.